Product Data Sheet

  1. GENERAL PRODUCT DESCRIPTIONHigh purity solid lubricant of large particle size ( range 0.074 mm to 0.297 mm) for closer tolerance lubrication applications to withstand extreme temperatures, extreme pressures and corrosive conditions.


    Solid Content100%

    Density2.25 gm./cc.

    Youngs Modulas470 – 980 Kg./

    Electrical conductivity0.0395 – 0.0693

    Electrical resistance0.00283 (at 21o C)

    Hardness25-45 Hardness Selerescope Less than 1-2 Hardness Mohs  scale

    Coefficient of linear   expansion at 17 oC to 190o C0.04244

    Sublimation Temperature3650o C

    Vapourisation temperature4500o C

    Oxidation Temperature900o C

    Flash PointNone

    Freeze pointNone

    Particle size0.074 to 0.297 mm.

    Acid ResistanceVery good

    Brine ResistanceVery good

    Chemical ResistanceVery good

  3. TYPICAL USESUsed dry or as an additive to oils and greases for long life  applications to withstand extreme pressure and high  temperatures. Ideal as a lubricant and parting agent on pipe joints, moulds, gaskets, gears, chains, packing etc. exposed  to air, alkali, gas, acid or brine.

  4. ADVANTAGESHigh purity SUPERLUBE provides unique lubricating   characteristics as it is unctuous, dry solid lubricant which  resists high temperatures, is a good conductor of heat and electricity and has a low coefficient of expansion.SUPERLUBE’s affinity for metal surfaces tends to result in  filling of the pores or small voids of the metal resulting in smoother surfaces. Also its solid state allows it to withstand extreme pressures without being forced out of load bearing surfaces. SUPERLUBE resists conditions that cause failure of most lubricants namely high temperature, high  pressure and corrosive chemical conditions. As it is  chemically inert and is not affected by temperature and  pressure, it is an ideal parting agent for application on  pipe threads, gaskets and moulds. As it not wetted by molten  metals it is an ideal mould lubricant. Being chemically  inert it is ideal for applications in corrosive conditions.



    500 gms. Tins – 48 per case020548

    1 KG. Tins – 24 per case020124

    4 KG. Tins – 6 per case020406

    10 KG. Drums021000

    20 KG. Drums022000